Page 265 - Eagle Scientific Ltd - Catalogue

ES Mixers

TUBE ROLLER

Provides a gentle, but highly efficient, rocking and rolling action for complete mix-
ing. Designed for continuous quiet operation. Recommended for mixing blood
samples, viscous substances and liquid-solid suspensions where minimum aera-
tion is required. Units can be used in incubators up to 60°C and humidity up to
80%, or in cold rooms down to 4°C.
The six rollers design has a small space saving footprint.
The nine rollers design has a high capacity.
Robustly constructed and designed for easy cleaning, having plastic rollers and a
drip tray to collect accidental spillages.
Most sizes of tubes, Bijoux, Universals and bottles can be accommodated, up to
100mm diameter. An accessory stacking system C50-4430 is available where
bench space is at premium.
Technical Specification C50-4410
Amplitude: 16mm
Maximum load: 5kg
Roller size (l x d): 340 x 30mm
Electrical Supply: 230V, 50Hz, 50W
ANALOGUE TUBE ROLLER
Control is through a simple on/off switch and the unit will run continuously at the
fixed speed of 33rpm.

C50-4410 Tube roller, analogue, 6 rollers, fixed speed
Overall dimensions (w x d x h): 565 x 240 x 110mm
Net weight 5.1kg
C50-4415 Tube roller, analogue, 9 rollers, fixed speed
Overall dimensions (w x d x h) 565 x 360 x 110mm
Net weight: 6.9kg
DIGITAL TUBE ROLLER C50-4415
This advanced digital model offers variable speed from 5 to 60rpm and a built-in
digital timer which can either set from 1 second to 90 minutes, 1 minute to 9 hours
or in minutes only mode up to 9999 minutes for maximum versatility.
C50-4420 Tube roller, digital, 6 rollers, variable speed
Overall dimensions (w x d x h): 565 x 240 x 110mm
Net weight 5.1kg
C50-4425 Tube roller, digital, 9 rollers, variable speed
Overall dimensions (w x d x h): 565 x 360 x 110mm
Net weight: 6.9kg
STACKING SYSTEM FOR TUBE ROLLERS
Ideal where bench space is at a premium.
The stacking system consists of four magnetic stacking blocks that are designed to
allow rollers to be stacked on top of one another, thus saving valuable bench
space. Up to three rollers can be stacked in virtually any combination. Fitted in sec- C50-4420
onds, without any need for tools, the stacking blocks are easy to move into the
optimum position where they hold the rollers securely in place by powerful mag-
nets. They are equally as easy to dismantle if required for storage or cleaning pur-
poses.
C50-4430 Stacking System for Tube Roller, 4 x stack blocks

C50-4425

259