Page 179 - Eagle Scientific Ltd - Catalogue

ES Fume Hoods

SAFETY BUBBLE FUME HOOD
A low cost, re-circulatory bench mounted fume hood system that performs to
recognised fume hood containment standards EN 14175 and BS 7989. This ensures
protection for the user when handling hazardous chemicals. It is fully performance
tested and designed as an entry unit to the general laboratory market.
Laboratory air is drawn in through the front opening and carries airborne
particulates and chemical vapours away from the user. Airborne contaminants are
captured in a specially designed safe change filtration module. Clean air is then
exhausted safely back into the laboratory saving on energy and facility costs.
The base is constructed of 10mm chemically resistant, process modified
polypropylene with 6mm chemically resistant, impact modified acrylic top and with
white powder coated steel extract unit and filter module. No facility air supply is
required.

Technical Data
Performance: EN 14175 and BS 7989 Certified
Airflow: 0.40m/s face velocity factory calibrated
Alarm: Hot Wire Sensor - Audible/Visual
Filtration: Combined HEPA/Activated Carbon validated H14 efficiency to EN 1822 C41-7600
Filter Life: 2-3 years safe change design
Power: 90-240V 1ph 50/60Hz Load 1.0A
C41-7600 Safety Bubble Fume Hood
Picture shown here has green base. Other colours (blue, red, black and white) are
available on request.
Spares
C41-7660 Filter Kit, HEPA/Carbon Filter, complete with replacement ducts
PCR CLEAN AIR SAFETY BUBBLE
The PCR clean air bubble is designed to provide an enclosed environment for the
handling of sensitive PCR reagents. The system operates as a positive pressure
HEPA filtered system that creates a continual ISO Class 5 clean air blanket over the
sample preparation area. Airflow is taken in from the laboratory and filtered through
a 2 stage HEPA filter system before passing into the enclosure and back out into
the laboratory. Airflow is monitored continuously to ensure that no airborne
contaminants can enter the enclosure. Each enclosure also features a proven 254nm
germicidal UV-C lamp to provide bio-decontamination before and after use. The
base is constructed of 10mm chemically resistant, process modified polypropylene
with 6mm chemically resistant, impact modified acrylic top and with white powder
coated steel extract unit, filter module and UV-C lamp. No facility air supply is
required.
Technical Data
Performance: ISO Class 5 Clean air environment UV-C germicidal lamp (254nm)
Airflow: 0.40m/s face velocity factory calibrated
Alarm: Hot Wire Sensor -Audible/Visual
Filtration: Two stage HEPA filtration system proven to H14 standard EN 1822
Filter Life: 2-3 years safe change design C41-7650
Power: 90-240V 1ph 50/60Hz Load 1.0A
C41-7650 PCR Clean Air Safety Bubble
Picture shown here has green base. Other colours (blue, red, black and white) are
available on request.
Spares
C41-7665 Filter Kit, HEPA/HEPA Filter, complete with replacement ducts

173