Page 42 - Eagle Scientific Ltd - Catalogue
P. 42
ES
Balances
MOISTURE ANALYSER, BASIC, LOAD CELL TYPE
Moisture analyser for quick determination of moisture content of small samples
based on weight loss (using strain gauge load cells) during drying the sample with
a halogen lamp (thermo-gravimetrical method).
Time, temperature and profile of drying process can be matched to physicochemical
properties of examined material. To simplify drying parameters choice, initial drying
can be done with graph result.
It can be connected to an external printer or a computer using the RS232C
connection to print receipts, reports or further processing weighing results. The
printed reports enable fulfilment of GLP recommendation
C12-0280 Moisture Analyser, Basic, Load Cell Type, 110 x 0.005g, 160°C
MOISTURE ANALYSER BALANCE, ECONOMY, HALOGEN
Similar to C120280 but uses laboratory balance mechanism for determining the
weight loss.
C12-0285 Moisture Analyser Balance, Economy, Halogen, 210 x 0001g, 160°C
Technical Data for C120280 and C120285
C12-0280 C12-0285 C12-0280 & C12-0285
Maximum Capacity: 110g 210g
Readout unit: 5mg 1mg
Method: Load Cell Balance
Precision: 1% (sample 0.02 to 0.5g)
0.1% (sample 0.5 to 5g)
0.01% (sample >5g)
Repeatability: +/-0.5% (sample 2g +/- 0.1% (sample 2g)
+/-0.2% (sample 5g) +/-0.04% (sample 5g)
Setting memory: 20 drying programs (for 20 different materials)
Drying profiles: Standard, Slow, Step, Fast
Drying Modes: Time, Short (automatic), Manual
Minimal sample weight: 20mg
Working temperature: +18 - 33ºC
Drying temperature: <160ºC
Sampling time: 1-180 seconds
Max drying time: 10 hours
Chamber heating time up to 100°C: ~ 3 minute
Weighing time: <3ms
Power supply: 230V, 50Hz, 130VA
MOISTURE ANALYSER BALANCE, LABORATORY, HALOGEN
High temperature moisture analyser for quick and precise determination of
moisture content of small samples based on weight loss (using laboratory balance
mechanism) during drying the sample with a halogen lamp (thermo-gravimetrical
method).
Consists of a balance, allowing for continuous weight measurement, and drier, using
infrared radiation for sample heating. Features a readable backlit LCD display. Drying
time and temperature may be adjusted to physical and chemical properties of
tested material. To facilitate parameters selection, the analyser allows performing
of initial drying and displays drying characteristics chart.
Technical Data
Capacity: 210g max
Readout unit: 1mg
Humidity readout precision: 1% (sample 0.02 to 0.5g), 0.1% (sample 0.5 to
5g), 0.01% (sample >5g)
Humidity measurement repeatability: +/- 0.1% (sample 2g), +/-0.04% (sample 5g)
Working temperature: +18 - 33ºC
Drying temperature: <250ºC
Sampling time: 1-180 seconds C12-0290
Max drying time: 10 hours
Halogen radiators: 2 x 118mm 500W
Chamber heating time up to 100°C: ~ 3 minute
Connections: RS232C (to computer or printer),
PS2 (to pc keyboard), USB (to computer)
Power supply: 230V, 50Hz, 300VA
C12-0290 Moisture Analyser Balance, Laboratory, Halogen, 250®C, 210 x 0001g
36