Page 47 - Eagle Scientific Ltd - Catalogue

ES Balance Accessories

STATIC ELIMINATOR, AC METHOD, FAN TYPE, ADAM
This ioniser neutralises the static charge that accumulates in non-conductive
materials such as plastic, glass, ceramics, paper and textiles. When these materials
encounter friction, heat or pressure, static electricity can build up, especially in low
humidity environments. Lightweight and easily movable, the ioniser can be
positioned conveniently beside the weighing instrument, or it can be manually
directed at a particular item to be weighed. It is for indoor use only. AC adapter
included.
Technical Data
Discharge time: 9s/5cm, 13s/10cm, 100s/40cm (with fan on)
Standard distance from sample to ion source: about 5-40cm
Ozone concentration at a distance of 2cm from ion source: 0-0.05 ppm
Maximum air volume: 0.06cm3/min C12-3614
C12-3614 Static Eliminator, AC method, Fan Type

STATIC ELIMINATOR, DC CORONA METHOD, FAN-FREE, OHAUS
Designed to be used in conjunction with an OHAUS balance to neutralise
electrostatic charges between the test tube and the balance, increasing the accuracy
of measurements, particularly with low-volume samples.
The electrodes generate positive and negative ions that are delivered through fan-
free technology that doesn’t disturb fine samples.
The ioniser can be adjusted for optimal alignment with the balance, and its small
footprint takes up minimal space. The durable electrodes can be easily replaced
and have an operating life of 15,000 hours. It is for indoor use only.CE and CSA
compliant.
Technical Data
Ionic Concentration: >1*106 EA/cm3 (10cm distance)
Effective Static Removal Range: 100 to 400 mm from the outlet
Static Elimination Time (approx.): 1s/10 cm, 5s/20 cm (from ±1000V to ±100V)
Ozone Concentration: <0.05 ppm
Electrode Probes: Tungsten (17.8 x 2.5mm l x d)
(Durability: 15,000 hours) C12-3616
Power: 12V 0.5A
Power Supply Voltage Fluctuations: Up to ±10% of the nominal voltage
Installation Category: II
Pollution Degree 2
C12-3616 Static Eliminator, DC Corona Discharge Method, Fan-free, Ohaus
Spares
C12-3618 Electrode Probe
REMOTE CONTROLLER, A & D
A remote controller that can be connected to certain A & D balances in order to
display and control the weighing instrument remotely with key operations (no
access to internal settings) and outputs weighing data to another external device
such as a PC or printer via the RS232C connection.
Technical Data
Baud rate: 600, 1200, 2400, 4800, 9600, 19.200 bps
Refresh rate: Approx. 10 times/sec
(when the baud rate is 2400bps or greater)
Power supply: AC adapter
Power consumption: Approx. 11VA including the AC adapter
Standard interface: RS232C C12-3625
Applicable connectors: D-sub 9-pin (male) to connect to the balance,
DIN 8-pin (female) to connect to an external device
C12-3620 Remote Controller
RS232C/ETHERNET CONVERTER, SERIAL, WITH "WIN CT PLUS" SOFTWARE
It can connect the RS-232C interface of a weighing instrument to the Ethernet (LAN)
port of a computer or network that is not equipped with an RS-232C interface.
C12-3625 RS232C/Ethernet Converter

41