Page 394 - Eagle Scientific Ltd - Catalogue

ES
Washing

WASHING

BOTTLE WASHER
For rinsing bottles with neck diameters between 9.5 and 100mm and approx. 75mm
height minimum. In use an inverted bottle is placed over the jet which is then
depressed, releasing jets of water. The water flow ceases on removing the bottle.
Mounted on heavy cast base. Complete with 1 metre of hose for connection to water
supply.
C72-3020 Bottle Washer
GLASSWARE WASHER/DRYER, RESIDUAL DRYING C72-3020
Compact, under bench model with incrementally controlled residual drying.
Supplied with open front upper basket, open front lower basket, half width insert
basket for beakers, flasks and wide-mouthed glassware (for upper or lower basket),
half-width insert with 10 x 3 holders for 250-600ml beakers (for lower basket only),
half-width insert with 26 small spring hooks, 105mm high, spacing approx. 60mm,
for flasks, graduated cylinders, bottles, etc. (for upper or lower basket) and quarter
circle insert with six sections, for up to 200 test tubes 12mm x 105mm, includes lid
(for upper or lower basket). Pump for externally supplied rinse water not included.
For single phase power supply.
Technical Data
Wash temperature: up to 70°C
Maximum no. shelves: 2
Exterior dimensions: 600 x 600 x 835mm w x d x h
C72-3030 Glassware Washer/Dryer, Residual Drying
GLASSWARE WASHER/DRYER, PROGRAMMABLE C72-3030
Compact, under bench with drop-down front opening door for easy loading.
Microprocessor controlled programming with 10 standard programmes covering
most chemical or biological washing applications and up to a further 40 custom
programmes. Programme cycle times can be extended by up to 60 minutes each.
Drying time/temperature are selectable. Membrane keypad and backlit, graphics
LCD readout with clock, calendar, timer, temperature, programme or machine status
outputs, alarm function and troubleshooting menu. Separate RS232 serial ports for
printer and PC connection if required.
Other features include hot and cold water filling, no special plumbing required;
dispenser for liquid detergent; built-in water softener; acid rinse and
distilled/deionised water rinse facilities. Drying is by HEPA-filtered hot air.

Supplied without racks or baskets. These are available as accessories C72­3060 to
C72­3074.
Technical Data
Wash and rinse temperatures: up to 95°C

Water pressure:
1.5 to 5 bar for hot, cold and pressurised distilled
0 to 0.5 bar for unpressurised distilled
Effective washing heights:
C72-3050
With basket trays on two levels: bottom level: 280mm, top level: 190mm
With Jet racks on two levels: bottom level: 240mm, top level: 205mm
With Jet rack on bottom level only: 460mm
Power requirements: 230V 50Hz single phase, 30A, 2.8kW
Internal dimensions: 610 x 520 x 490mm
External dimensions: 845 x 900 x 645mm*
*The door extends a further 610mm when open.
C72-3050 Glassware Washer/Dryer, Programmable

388